Two of the most common household dangers are indoors fires and carbon monoxide poisoning. When it comes to indoors fires, most fires at home start accidentally, but their effects can still be devastating. Then, specifically for carbon monoxide poisoning, this household danger is basically caused by high levels of CO (carbon monoxide), for which this unusual build-up of CO indoors can occur from improperly maintained, installed or over-used fuel-burning appliances, as well as from back-drafting appliances or fireplaces, or even from idling cars that are left unused inside home garages. In fact, a recently published article by the CDC suggests that every year, at least 430 people die in the U.S. from accidental CO poisoning, while approximately 50,000 people end up visiting the emergency department each year due to accidental CO poisoning. With that said, it’s obviously important to have reliable ways to keep both yourself and your loved ones protected from such household dangers. To do just that, there’s nothing as reliable as the X-Sense SC07-W.
The X-Sense SC07-W is a smoke and carbon monoxide detector alarm that can accurately detect both smoke and high CO levels as well as quickly deliver accurate alerts of any potential dangers.
Not only that, but the X-Sense SC07-W also comes equipped with an Informative LCD Screen that displays real-time carbon monoxide concentrations in the surrounding air, all while also integrating a built-in LED Light Indicator that easily informs you about the alarm’s current status at a glance based on a color-code for its LED Light.
Moreover, this 2-in-1 smoke and carbon monoxide detector also performs a Self-Check Function automatically every 60 seconds, notifying you of any malfunctions via its flashing LED Light and also via an audible beeping pattern.
Best of all, the X-Sense SC07-W also integrates an internal Lithium Battery that provides 10 years of continuous power, with no need for battery replacements during that time period.
So, let’s have a more detailed look at the X-Sense SC07-W and check out all of the smart functionalities that this 2-in-1 smoke and carbon monoxide detector has to offer you.
DESIGN & SPECS
Starting with the device’s size, this 2-in-1 smoke and carbon monoxide detector alarm comes at a suitably compact size, measuring just 5.7 inches in diameter by just 2 inches tall / thick (146 x 51 mm). Additionally, the unit is also extremely lightweight, weighing just 0.66 lbs. (300 g).
Design-wise, the X-Sense SC07-W also features a sleek and elegant design throughout its discrete white body, which basically gives it a minimalist and ultra-modern look that allows the device to seamlessly blend in with the rest of your home decor.
Furthermore, this smoke and carbon monoxide detector alarm also features a solid and durable construction, as it is built with high-quality and ultra-durable ABS Plastic materials.
Moving on to the alarm’s internal components. Since this is a 2-in-1 smoke and carbon monoxide detector alarm, the X-Sense SC07-W comes equipped with both a Photoelectric Sensor and an Electrochemical Sensor to detect both smoke and carbon monoxide (CO) levels.
To be a little more specific, its Advanced Photoelectric Sensor is designed to detect smoke from fast-burning and smoldering fires, while its Advanced Electrochemical Sensor makes the alarm capable of detecting carbon monoxide leaks from faulty fuel-burning appliances.
Thanks to the combination of these two safety sensors, this 2-in-1 smoke and carbon monoxide detector alarm can provide any household with an accurate and truly reliable monitoring of both indoors fires and unusual / high carbon monoxide levels.
More importantly, it’s also worth mentioning that both of the device’s sensors are powered by an intelligent state-of-the-art chipset, which ultimately ensures homeowners can get rapid and very accurate alerts of potential indoors fires and/or high carbon monoxide levels.
Moreover, note that this smoke and carbon monoxide detector alarm comes built with air vents all around its body in a 360-degree set-up, which ensures an immediate detection of both smoke and carbon monoxide.
It’s also worth mentioning that the X-Sense SC07-W comes pre-configured to analyze 3 times before alerting anyone in your household, and this not only makes this detector alarm extremely accurate on its smoke and CO detections, but ultimately also helps to reduce and avoid false alarms.
On top of its extremely accurate smoke and carbon monoxide detection capabilities, this 2-in-1 smoke and carbon monoxide detector alarm also performs a Self-Check Function automatically every 60 seconds, for which the alarm will notify you of any malfunctions via its flashing LED Light and also via an audible beeping pattern.
In addition to all of that, the X-Sense SC07-W also comes equipped with an Informative LCD Screen that displays carbon monoxide concentrations in the surrounding air in real-time, with an extremely accurate capability of measuring CO levels indoors from 30 to 999 ppm (parts per million), which ultimately allows you to instantly determine if there are any dangerous CO leaks in your home environment.
Not only that, but the X-Sense SC07-W’s LCD Screen can also display the unit’s current working status, as well as its current battery level, plus a low-battery level warning when that finally occurs.
Below the device’s LCD Screen, there’s also a built-in LED Light Indicator that easily informs you about the alarm’s current status at a glance based on a color-code for its LED Light.
A Green Light means that the device is turned On and working properly, while a Yellow Light will inform you that the device’s Battery has been detected to be either faulty or at a low power level. Finally, a Red Light will represent one of the unit’s two potential alarm situations (either smoke detected or a unusually high level of CO (carbon monoxide) detected).
Lastly, sitting just below the detector’s LED Light Indicator, there’s also a built-in Loud Buzzer integrated under a dedicated Sound Alarm opening, which makes the X-Sense SC07-W capable of emitting a reasonably loud 85 dB Alarm Tone that can be very easily heard within 10 ft. (3 m).
The device’s Sound Alarm also features a Silence Duration of under 9 minutes (for smoke detections) or under 6 minutes (for detections of high levels of carbon monoxide).
SET UP / INSTALLATION
In terms of setting it up, the installation method for this alarm detector is quite simple, as all you’re required to do is to screw-in the package’s included screw fixings and mounting bracket and then simply screw the alarm unit onto its dedicated ceiling mount.
After that, the X-Sense SC07-W will be completely ready to protect your home from any potential fires as well as prevent any potential build-ups of carbon monoxide.
CONNECTIVITY
For the X-Sense SC07-W’s connectivity, note that this alarm detector can be configured to work in synchrony with additional alarm detectors within a Secure Network Connection for a wider coverage (for bigger homes) in order to ensure a full home protection, and all of that without ever suffering any sort of crosstalk interferences.
On that note, know that up to 24 X-Sense Link+ devices can be interconnected, no matter if they’re the same device-model or different X-Sense devices.
Thanks to that, you can easily create a wireless safety network for your entire house.
When having multiple alarm detectors connected within a Secure Network Connection, if one alarm happens to detect smoke or dangerous CO levels, all wireless interconnected units will have their own alarm functions automatically activated.
This basically ensures the earliest possible warning for residents via a multi-device interconnected alarm that can be heard anywhere within the house.
BATTERY & BATTERY LIFE
For its power, as said before, this 2-in-1 smoke and carbon monoxide detector alarm uses an 3V CR123A Lithium Battery that comes sealed within the unit, and this battery is powerful enough to provide the X-Sense SC07-W with 10 years of continuous power for an uninterrupted 24/7 protection during that time frame.
Thanks to that, during that time period, you won’t ever have to worry about recharging the unit’s internal battery or performing any battery replacements,
WHAT’S IN THE BOX?
Inside the package, users will find: their X-Sense SC07-W Smoke & CO Detector Alarm, along with the unit’s dedicated Mounting Bracket (plus 3 x Screws and x3 Anchor Plugs), and also the unit’s User Manual.
FINAL THOUGHTS
The X-Sense SC07-W is a smoke and carbon monoxide detector alarm that can accurately detect both smoke and high CO levels as well as quickly deliver accurate alerts of any potential dangers.
Not only that, but the X-Sense SC07-W also comes equipped with an Informative LCD Screen that displays real-time carbon monoxide concentrations in the surrounding air, all while also integrating a built-in LED Light Indicator that easily informs you about the alarm’s current status at a glance based on a color-code for its LED Light.
Moreover, this 2-in-1 smoke and carbon monoxide detector also performs a Self-Check Function automatically every 60 seconds, notifying you of any malfunctions via its flashing LED Light and also via an audible beeping pattern.
Best of all, the X-Sense SC07-W also integrates an internal Lithium Battery that provides 10 years of continuous power, with no need for battery replacements during that time period.
If you’re interested in buying it, each unit is currently discounted from its normal price of $42.99, now going for just $39.99 each (saves you $3), and the company also has a 3-pack available for purchase, which is also discounted from $119.99 to just $109.99 (saves you $10).
You can order yours online, either directly from X-Sense’s official shopping page, or alternatively, you can instead get a 6-pack from Amazon for $239.99, if you prefer.
